EFormance Engineering

 

1970 Mach 1 radiator support bracket

The bracket below is a custom radiator upper holddown bracket for a 1970 Mustang Mach 1. The customer was unhappy with the stock radiator retention mechanism, so he asked me to make a bracket.

A couple of solutions were available, but the quickest and cleanest solution was to bend the bracket out of a single piece of steel. It's made of 1.25" 10 gauge steel and bent entirely in one segment. He was happy with the result and it didn't take long to make.


©2010 EFormance Engineering.
EFormance® is a registered trademark of EFormance Engineering
Email us Feedback | Home